Replacement Part Number: 22448-ED000 C1696 22448JA00A
Replacement Ignition Coil Pack Set of 4 - The ignition coils or ignition coil plug provides spark for your engine. Over time the factory ignition coil packs can fail leading to poor gas mileage, hesitation, and a check engine light (CEL). Replace your faulty ignition coil and restore performance and driveability on your Altima, Sentra, Rogue or Cube.
1.Common ignition coil problems, no start/hard start, long start time, misfire, lack of power, inconsistent transmission shifts, spark plug fouling, premature catalytic converter failure, poor fuel economy, check engine light illumination
2.After replacing the ignition coil make sure the spark plugs are also in top condition, as replacing the coil will be useless if the spark plugs fail. Worn spark plugs can cause the air-fuel mixture to not burn properly, which can lead to power loss and many other difficulties
3.Ignition coils can fail due to age, overuse or simple manufacturing defects. The material may crack or melt due to heat from the electrical terminals. Prolonged engine misfires can damage the catalytic converter and may lead to engine blowouts.
1.Misfires, irregular idling or hesitation during acceleration can occur due to a damaged coil pack. Replacing the ignition coil can solve problems such as slow acceleration, poor fuel economy, engine misfires and difficulty starting the vehicle
2.nstalling a reliable ignition coil makes your car look like new and can solve hard starts, long crank times, misfires, high fuel consumption, engine vibration, check engine lights and other problems.
1.It can be inserted directly into the cylinder bore. The coil is bolted to the mounting hole near the engine cylinder head. It is recommended to find a professional to install
1.The ignition coils are all made of high quality heat resistant materials to ensure quick and easy installation, as well as excellent performance and reliability, while resisting the cracks, pinholes and defects that most often cause failure problems.
2.Consists of heat resistant material coated with high quality plastic. Its superior quality allows for enhanced durability and reduces the likelihood of engine misfires. High heat resistance ensures quick and easy installation, as well as excellent performance and reliability, it has good mechanical stability and protection against corrosion.
3.Made of high quality wire and heat resistant wire coating. This makes our products durable and reliable in extreme conditions, while being highly resistant to strong sparks from plugs, and resistant to corrosion and wear. Solve running problems, such as non-ignition or poor acceleration, and excessive vehicle shaking
1.Simultaneous replacement of the ignition coil and spark plugs is recommended to reduce the likelihood of common ignition system failures such as no start, engine vibration, stalling, lack of power, spark plug fouling and poor fuel economy
2.It is important to ensure that the spark plugs are also in top condition after replacing the ignition coil at the time of diagnosis, as replacing the coil will be useless if the spark plugs fail. Worn spark plugs can cause the air-fuel mixture to not burn properly, which can lead to power loss and many other difficulties.
1.Designed for ignition coil replacement applications. Each component is matched or modified with an OE design to ensure quick installation and superior performance and reliability. for optimal engine spark performance
2.The new ignition coils are designed to replace defective factory ignition coils and solve operating problems such as non-ignition or poor acceleration and excessive shuddering of the vehicle. to improve the efficiency and driving performance of the vehicle
3.Made of high quality materials for greater stability and reliability, surpassing OEM standards and helping to solve problems caused by poor coil shake, misfire, etc. Keeps your engine running smoothly
1.12 months warranty. If there is any problem during the one-year quality warranty period, please feel free to contact us for a free replacement or refund
1.To avoid mistakes, please double check our product photos to make sure our products are the same as your old parts and have the same sockets. And please make sure your vehicle type is in the parts description on the back.
2.Please note - Please check the car's build model trim engine, product appearance and part number to make sure this is the correct part you need. If you have any questions, please contact us for answers
3.Please double check the connectors and insert your old parts into our pictures to make sure they are the same before purchase. Failure to do so can lead to compatibility issues and easy return issues
Infiniti QX60 2014-2015
Nissan Sentra 2004-2012
Nissan Altima 2007-2017
Nissan Rogue 2008-2018
Nissan Urvan 2010-2013
Nissan Pathfinder 2014
Nissan Rogue Select 2014-2015
Nissan Sentra 2007-2008
Nissan Sentra 2010-2012
Nissan NV200 2013-2014
Nissan Rogue 2017-2018
Nissan Versa 2007-2012
Nissan Cube 2009-2014
Nissan Sentra 2013-2018
Nissan Versa 2009-2012
Nissan Sentra 2017-2018