Replacement Part Number: 22060-AA070 213-1828 144-745 S8683 71-6668
Mass sensor Fits：2007-2013 Nissan Altima & 2005-2013 Armada & 2005-2013 Frontier & 2009-2013 Cube & 2004-2013 Maxima & 2006-2012 Pathfinder | Infiniti 2009-2012 FX35/FX50 & 2004-2013 QX56 & 2006-2010 M35 | 2009-2012 Suzuki Equator & More.
1.Incorrect air and fuel mixture: If the air to fuel ratio is incorrect, this can lead to ignition problems Deposits in the cylinder: Dirt, grime and contaminants can get into the cylinder and create all kinds of problems.
2.Defective, unhealthy or incorrect spark plugs: the wrong type of spark plugs, plugs with deposit buildup or incorrect spark gap can lead to poor spark or incorrect spark timing
3.Improper timing: Sparks not firing at the correct time can lead to poor spark or incorrect spark timing, causing abnormal combustion in the engine cylinders
4.Your Toyota's oil pressure switch or oil pressure sensor communicates with your engine's computer and will turn on the oil light if the oil pressure is low. In some cases, they can fail due to oil leaks and must be replaced to prevent catastrophic damage to the engine
1.The detonation sensor is used to measure the degree of engine shake, easy to install, stable performance, strong resistance. The ignition advance angle is adjusted when the engine shakes, thus ensuring the proper operation of the vehicle.
2.Knock sensors are used to protect the engine and help reduce engine power, and are built to accurately determine the vibration generated by a knock and effectively generate a voltage signal for your vehicle's computer.
3.The knock sensor is a device used to prevent knocking or sparking. Sensing sensitive, fuel-saving and environmental protection, smooth acceleration, improve power, eliminate cylinder noise and fault codes, effectively solve the problem of failure. Protect the engine mechanical parts, high quality parts, safe, stable and durable.
1.The burst sensor is located on the engine block or screwed into the side of the block or under the intake microfolders, thus generating an input voltage that the ECM uses to measure dynamic engine vibrations
1.Made of high quality metal material with ABS plastic material, durable and corrosion resistant, in strict quality control, stable features and high reliability.
2.Made of good material, durable and corrosion resistant, effectively solve the problem of failure. Protect the engine mechanical parts, high quality parts, safe, stable and durable.
1.A knock sensor is a device used to prevent knocking or spark popping. It is used to detect engine knocking or sound, which is caused by abnormal combustion in the engine cylinder. Eliminates cylinder rattling and fault codes to effectively solve malfunction problems. Protects engine mechanical components
2.This burst sensor is designed to respond to high burst frequencies, adapts to shifts in engine burst frequency, making it a more flexible sensor that responds to the correct engine burst in a wide range of vehicle conditions accurately determines the vibration generated by the burst and efficiently generates a voltage signal for your vehicle's computer
3.The burst sensor is used to eliminate cylinder rattles and fault codes for effective troubleshooting Protects mechanical engine components sending signals to the Engine Control Module (ECM) to adjust timing and prevent detonation or spark bursts
1.Consistent OEM specifications to ensure perfect fit of related parts - Durable and reliable use of material qualifications - Multidisciplinary testing such as balanced housing durability wheel load limiting seals, etc. to improve the quality of each unit
2.Made of high quality materials under strict quality control, stable characteristics and high reliability, the ignition detonation sensor allows the vehicle computer to monitor the combustion chamber, advance or delay ignition and valve timing or injector pulse width for optimal engine performance
1.12 months warranty. If there is any problem during the one-year quality warranty period, please feel free to contact us for a free replacement or refund
1.To avoid mistakes, please double check our product photos to make sure our products are the same as your old parts and have the same sockets. And please make sure your vehicle type is in the parts description on the back.
2.Please note - Please check the car's build model trim engine, product appearance and part number to make sure this is the correct part you need. If you have any questions, please contact us for answers
3.Please double check the connectors and insert your old parts into our pictures to make sure they are the same before purchase. Failure to do so can lead to compatibility issues and easy return issues
Fit for 1999-2002 for Subaru Forester 2.5L,1999-2001 for Subaru Impreza 2.2L,1999-2002 for Subaru Impreza 2.5L,1999-2001 for Subaru Legacy 2.5L,2000-2001 for Subaru Outback 2.5L